|
|
|
||||||||
| Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
|
Thread Tools | Display Modes |
|
#20
01-28-2004, 04:28 PM
|
||||
|
||||
The output of the pump also has to be moded to fit. The 1/2" pvc is pushed over a piece of 1/2" vinyl tube and heated. Tighten a hose clamp over it so it's just firm, let it cool down and remove the clamp and you'll have a snug air tight fit that can be removed later. Vinyl tube is 3/4" long and the 1/2" tube is 2 1/2" long.
   Clinton 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode
