![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||||
|
|||||
![]() Quote:
Unless you have a secret leak there should be no other way for your salinity to drop like that, are you sure your initial measurement was correct? Sent from my Desire HD using Tapatalk |
#2
|
|||||
|
|||||
![]() Quote:
To bring the salinity back up slowly you can just replenish evaporated water with mixed saltwater (1.025) over the next few days. With a tank that small you should be checking salinity a little more often till everything stabalizes. Good luck and keep us informed. |
#3
|
||||
|
||||
![]() Let's see some pics of the 300g fowlr
|
#4
|
||||
|
||||
![]() If you are using a swing arm salanity tester, do you rinse it after testing? If not that maight explain what is going on. You fill a bucket, test several times, dissolving salt stuck in the hinge for the float after the 3rd or 4th test. Then you put is away, salt dries and then you go to test again once, and the arm has slight resistance, thus giving it a lower reading.
__________________
Winning Last edited by ReefOcean; 09-07-2011 at 08:51 PM. |
#5
|
||||
|
||||
![]() If you have a skimmer on the nano that might be your culprit as it wouldn't take much volume to lower your salinity.
|
![]() |
Thread Tools | |
Display Modes | |
|
|