![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||||
|
|||||
![]() How much top off water have you replaced in the week?
__________________
Feed the bear goodies, make a new friend, don't feed the bear............... 8' - 165gal Reef DIY LED's Build 2012 Nano Contest Winner Febuary 2013 POTM Winner 300 gal + 60 gal Complete DIY Build |
#3
|
|||||
|
|||||
![]() What kind of salinity tester are you using? Before you start to raise the salinity make sure you go slow. Lower salinity is easier on the live stock then when your salinity gets too high and maybe that's why the seahorse is still alive. It's odd that it has dropped that much. Try to get another source to test it before you do some thing drastic.
__________________
Though a tree grow ever so high, the falling leaves return to the root. 300DD - 140DD ![]() TOTM Fall 2013 |
#4
|
||||
|
||||
![]() I guess I should have said that I have 2 other tanks a 300 gal fowlr and a 90 gal reef. The salinity in these tanks are always consistent so I know the meter is not the problem. Is it possible that the salt is settling to the bottom. There is not much flow in the tank just the filter from factory
|
#5
|
|||||
|
|||||
![]() No, that's not possible. Salt won't settle out. If the testing device is accurate, there is more topoff water going in than evaporating. Which doesn't make a lot of sense unless the tank is half full. Or you have automated topoff that isn't working right.
__________________
Brad |
#6
|
|||||
|
|||||
![]() Salt will sometimes migrate to areas of lower concentration (Diffusion). To combat this line the rim of your tank with something saltier than the tank's water. This will effectively contain your salinity.
I'd recommend a MFF or McDonald's Fry Fence. |
![]() |
Thread Tools | |
Display Modes | |
|
|