I have a fan blowing and a titanium coil in my sump, the water runs from my cold water line into my RODI filter system. The solenoid is controlled by my AC3 controller and it lowers my tank's temperature and increases my RODI output.
In the winter time, less evaporation and the water output is less and in the summer I have more evaporation from the fan blowing but matched up with higher water output. It's cheaper than running a chiller and I have to replace the solenoid every 12 months or so but that's only $30 and no energy consumption.
However, this needed to be well planned out or you'll have more trouble dealing with floods!
Steven
|
06-07-2011, 01:24 AM
Threaded Mode
