![]() |
|
||||||||
| Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
|||||
|
|||||
|
I think putting valves on overflow/drain lines is insane myself. The amount of water that would drain down any one that is properly designed should be miniscule, and obviously a sump should be able to handle it (in the case of a power-outage, etc...). I've seen people make the mistake of closing drain lines and having tanks overflow, or a partly-closed valve just allows opportunity for stuff to clog it. Risky IMO. The only exception is something like a herbie or beananimal overflow... but in those cases you have unobstructed back-up drains.
Just my 2 cents, Cheers, Chris
__________________
No more tanks - Laying off the ReefCrack for awhile!Cheers, Chris |
|
#2
|
||||
|
||||
|
Okay, well thats a consideration. I can always add the valve later if I need to i guess.
|
|
#3
|
|||||
|
|||||
|
A valve on the return line for sure but not the drain unless you have two drain pipes in a herbie configuration.
Your drain size is fine Last edited by sphelps; 06-03-2011 at 02:16 PM. |
|
#5
|
||||
|
||||
|
i would probably go with a bigger drain.i'm using a stockman with a 2" drain
|
|
#6
|
|||||
|
|||||
|
Quote:
windcoast, what pump are you using or plan on using? Last edited by sphelps; 06-03-2011 at 04:02 PM. |
|
#7
|
|||||
|
|||||
|
I have a gate on my drain, nothing on my emergency just it gets plugged. On the return I am running a check valve, which I reccomend. In 3 years I have not had anything overflow with this set up.
On my cube I had ball valves on the return and drain... no check valve. Now this set up I Had a spill once which fried a powerbar. everytime I did a water change I had to close the return line, there were a few times I almost forgot. |
|
#8
|
||||
|
||||
|
Quote:
Hey! Im using a Hydor seltz pump (800 gph model). I calculated the loss in the gph from the head and it equals out to about 500 gph. |
|
#9
|
||||
|
||||
|
Quote:
I can maybe step up to a larger pipe ( 1 1/4" or 1 1/2"), but I don't know if it is a benifit considering the bulkhead restricts the flow. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|