Need Major Help With Profilux 2ex issues

[Slick Fork]

I know when I set up my laptop to work with the profilux I had to find a driver for the USB-RS232 cable as it wasn't native to windows 7.

If yours is the EX version though shouldn't you be able to connect via LAN?

[The Grizz]

Originally Posted by rjengen

What OS are you running on the laptop bud?

Running XP on both my laptops

Originally Posted by Slick Fork

I know when I set up my laptop to work with the profilux I had to find a driver for the USB-RS232 cable as it wasn't native to windows 7.

If yours is the EX version though shouldn't you be able to connect via LAN?

I have know idea about connecting via LAN, are you saying use an Internet cable from the controller to the laptop? I am somewhat computer stupid.

Originally Posted by mike31154

Not sure I can help much but I'll give it a shot. I have a handheld VHF radio and in order to change the frequencies it operates, I need to hook it up to my notebook through a USB adapter cable since it doesn't have an RS232 port. I needed to download USB to RS232 port emulator to get the Kenwood software to see the radio through the USB connection. The emulator allows a USB port to emulate the RS232 connection. I assume your Profilux comes with the USB cable interface as well & more than likely includes some sort of port emulator? On a side note, I can't figure out why companies are still making hardware with RS232 interfaces, don't think any computer less than 5 years old physically has an RS232 connection.

In any case, when I hook up the radio via the USB interface and open the Kenwood programming software, the Setup menu item allows me to assign a Communication (COM) Port. I still run Win XP on my notebook & the Kenwood software 'Setup' menu brings up a window with a total of 20 COM ports. Two of them end up being selectable COM3 & COM5, the remainder are greyed out. The one that usually works in my case is COM5. No idea if the Profilux software allows you to access the same info but if it does, you can try whatever ports it shows. Failing that, you'll need to get into the Windows Device Manager and try to find the "Ports (COM & LPT)" feature. With the Profilux on & connected, you should see your USB to Serial Comm Port option in there, although since you're getting the 'not recognized' error, your only option might be to find the feature through your Profilux menu somehow. When my radio is hooked up, turned on and I've selected COM5 from the Kenwood software interface 'Setup' menu, I see "Prolific USB-to-Serial Comm Port(COM5)" under "Ports (COM & LPT)" in the Windows Device Manager. This is the USB to RS232 port emulator software I downloaded & installed.

Best of luck. The link provided by the AquaDigital dude isn't all that detailed & not much help. Perhaps it's best to try & get hold of Profilux themselves. Could be that there's a hardware or firmware problem with the Profilux that needs to be fixed.

All my com ports are labeled as com0 and can't figure out what happened, there was one that was com4 but don't have it anymore.

[Slick Fork]

Yeah, if you have a LAN port on the profilux you can connect it via an internet cable to your laptop. Not sure of the details as I don't have the LAN connection on my profilux.

[The Grizz]

I will give that a try later after I am finished with the days work, thanks Chris

[The Grizz]

Well stupid me I was looking at the wrong port on my controller thinking it was a LAN but it was something else. Back to my delema again.

[mike31154]

Try this:

http://forum.aquariumcomputer.com/sh...se-read-first!

[The Grizz]

I took a look at the link and hit a snag. On my device manager there is no line that list Ports and LPT, last thing on the list is USB controller.