JBJ auto water top off

[corrosionjerry]

My JBJ top off with RO water recently starting acting up / seems like the sensor is not working properly.... move it up and down and it kicks in however it still is red after and will not kick in unless I move that sensor / doesnt apear to be any build up on the sencer ... as I am using ro water for top off water....

any ideas what I need to do to make this work again or is this a cronic problem with jbj top off devices?

[gobytron]

are the sensors clean?

[corrosionjerry]

Originally Posted by gobytron

are the sensors clean?

I believe so... feel smooth

[viperfish]

Doesn't matter if you're using RO or not, you're float is still sitting in salt water. Try soaking it in water and vinegar for a bit, just to be sure it's completely clean. Have you checked the plug for the sensor to make sure it's not loose, I know mine has done that.

[corrosionjerry]

I will try cleaning it in vinegar / for now it looks like I may of solved the problem as I noticed the lift pump I am using was a little slow so I blew it out and it is pulling more water now and everything apears to be back to normal... I will clean the sensor just in case ....

Just wondering it that little aqua lifter pump is a little to small / may be the root cause

[don.ald]

it aqua lifter is too small, wont work properly with the ATO. the ATO will time out before it pumps enough water.

[sheamurai]

+1 on what don.ald said above.

I had the same trouble - and it was the aqua-lifter that was the problem. The ATO has a fail-safe feature in it. It prevents the ATO from running on if the sensor gets jammed "up". I think the default setting is like 5 minutes, and can be adjusted up to 10, but its been so long now I don't remember exactly the length the time out is.

Once the time out has kicked in, it won't start up again without being shut off/on.

You can set the time out if you take the cover off.

Once I put a proper pump on the ATO, it has worked slick ever since.

I'm pretty sure I found a manual online which detailed this, but I can't find it or the link now.

But if you put a faster pump on that sucker, I am sure it will work for ya.