Advice on Glue and Coral Skeleton Base Trimming

[RedCoralEdmonton]

Hey, thanks for clarifying, you can trim the skeleton on branching torches, hammers, frogspawn.... As long as you make sure you don't cut through tissue, so to be safe make sure there is 1.5" or longer on the branch from the heads, other then that the best adhesive for this application is marine epoxy as opposed to any type of gel glue, hope this helps!

Steve

[monocus]

the marine epoxy is a solid 2 part epoxy(tunze or other similar brands)-do not use a gel type marine epoxy as it is toxic until it cures

[CaptainYooh]

Originally Posted by RedCoralEdmonton

...so to be safe make sure there is 1.5" or longer on the branch from the heads, other then that the best adhesive for this application is marine epoxy as opposed to any type of gel glue, hope this helps!

Steve

Thanks, Steve. Unfortunately, there's no 1.5" long "stem". All seven heads are kind of stemming from one thick bulge, so trimming it might not be an option, I guess. I will think of making a small base for it from sand and glue, first, and then attaching it to this base. Then it should be easier.