Building Custom Tank...

[reefwars]

its easy enough to do but if your drilling the holes your self im not sure how easy it is to drill 6 holes in a 30" span?? could be easy as hell im not sure but worth checkin out.

also at 30" your glass would have to be on the thick side not sure if 12mm would do or not??

the 150 halides may not be as strong as you like if yu plan to keep any sps in there or high demanding corals...... depends on what yor keeping i guess

i just built my own cube and drilled it for a herbie style over flow and i gotta say these are ultra ultra quiet and no bubbles what so ever much much better than a durso.

[_Adrian_]

Thanks for the input...
im not planning on any SPS corrals as im more of a polyp / softie fan and even if i do add SPS i will make sure they are going to be placed accordingly in the tank that they get enough light.

As far as the holes go...
It's a 48" x 6" strip so 6 holes shouldn't be an issue as the return from the closed loop will be exactly 6" x 6" x 15" ( 15" being the height of the overflow box ).

I will get busy with sketch up and post a drawing tomorrow....

[The Grizz]

Instead of using privacy glass for the OF I would use acrylic, then you could cut some slotted holes in it to hide a couple power heads in the OF box. It would also be easier to cut slots in the acrylic for water flow into OF. Are you planning to build yourself or have a builder do it?

[_Adrian_]

Originally Posted by The Grizz

Instead of using privacy glass for the OF I would use acrylic, then you could cut some slotted holes in it to hide a couple power heads in the OF box. It would also be easier to cut slots in the acrylic for water flow into OF. Are you planning to build yourself or have a builder do it?

well,
I know i can do it myself, but thinking of getting someone else to build it for me. I could probably get the glass cut and have it polished and assemble it myself, probably the same for the sump. I don't think the glass would be over $250

[The Grizz]

Well if your interested and want to get the glass I could put it together in the shop, building a few ATM myself. Even have a full sheet of 3/16" black acrylic and some GE SCS 1200 black silicone.

[_Adrian_]

Originally Posted by The Grizz

Well if your interested and want to get the glass I could put it together in the shop, building a few ATM myself. Even have a full sheet of 3/16" black acrylic and some GE SCS 1200 black silicone.

That is very tempting and also gives me more ideas
PM me...

[The Grizz]

PM inbound......