![]() |
|
#1
|
|||||
|
|||||
![]() Put a euro brace on the tank and build you canopy so it comes down to the water line by adding a small strip of wood on the inside of the canopy to sit on the euro brace. Stain exterior to your color liking, then paint inside white. Seal both sides and all edges with a double coat of lacquer.
__________________
Feed the bear goodies, make a new friend, don't feed the bear............... 8' - 165gal Reef DIY LED's Build 2012 Nano Contest Winner Febuary 2013 POTM Winner 300 gal + 60 gal Complete DIY Build |
#2
|
|||||
|
|||||
![]() Good idea thanks Grizz.
I was talking to a friend about how his old one was made and I was thinking of building my frame then having a couple a glass blocks on the eurobracing that would keep the wood from getting wet. Then have the skirt come down a little past the waterline.
__________________
Ryan |
#3
|
|||||
|
|||||
![]() As long as you seal the inside wood with a good quality exterior clear sealant you will be good to go. Clear silicone would work well on the edges that will be sitting on the euro brace.
__________________
Feed the bear goodies, make a new friend, don't feed the bear............... 8' - 165gal Reef DIY LED's Build 2012 Nano Contest Winner Febuary 2013 POTM Winner 300 gal + 60 gal Complete DIY Build |
#4
|
|||||
|
|||||
![]() I use Varathan Diamond Coat on my DIY cages for my snakes. I use it for the low/no VOC would this be safe to use on the aquarium as well?
__________________
Ryan |
#5
|
|||||
|
|||||
![]() I don't see why it would not work, it not going to come in contact with the water. I have used that product on canopies as well with no issues.
__________________
Feed the bear goodies, make a new friend, don't feed the bear............... 8' - 165gal Reef DIY LED's Build 2012 Nano Contest Winner Febuary 2013 POTM Winner 300 gal + 60 gal Complete DIY Build |
![]() |
Thread Tools | |
Display Modes | |
|
|