![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
![]() so i get nuts from my sea swirl,
all in a sudden it is introducing big fat air bubbles in my tank, and not a little. it never did this but now, I could kil the thing. I tuck it out and found that the 2 seal ring’s are a bit worn out, so I put some Vaseline on them, but still. any one that knows how to seal it (it is 100% the seal, no air coming from the pump, and you hear the water and air mix in the pipe of seaswirl |
#2
|
||||
|
||||
![]() If the seals are worn they will need to be replaced. If they are odd shaped get an o-ring of the right diameter and cut it to length and reglue the ends together with CA glue (ie.crazy glue)
Last edited by intarsiabox; 02-20-2011 at 02:22 PM. |
![]() |
Thread Tools | |
Display Modes | |
|
|