|
|
|
|
|
#1
01-15-2011, 01:35 AM
|
|||||
|
|||||
good luck and strong backs to ya!
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694 
|
|
#2
01-19-2011, 01:39 AM
|
||||
|
||||
|
ok so heres how things ended up after the weekend!
first things first i should tell you i have an insanely worrisome landlord! so we started in the backyard!  Bruce was out to help us!  this is where the tank had to go! so we ended up taking out the railing to make life easier this is the space in front of the front door!  and unfortunately thats as far as we got! the tank is 1mm to big to fit through the door! i %&$# you not! 1mm! so we talked about taking the inner frame of the door off which has the weather stripping on it, not the outside frame and the landlord was having non of it!! so the next step is either leave the tank there until i move which would be easiest or get one of the bottom panes of glass off the tank, get the tank in the house, and then redo the bottom of the tank! now either way i have to get the eurobracing fixed so i might get the manufacturer to do all of the above! heres the state of the euro-bracing now     any thoughts on the euro-bracing? ive been told by jason that the mfctr of the tank has said regardless of euro-bracing the strength of the tank is uncompromised  so ya thoughts would be appreciated! Drew
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
