multidirectional flow

[StirCrazy]

Originally Posted by golf nut

, using a 1 rpm motor, or any rpm motor there will be no random activity, Bean has a better alternative.

as for the timers, do youmean that you have to substitute different timers or is there an adjustible one (weather it be by dip switch or screw)

Don't know who bean is but I think you miss read what I ment. the random activity I was talking about wasd of the water in the tank as it reverses direction. so once the inlet/outlet switch the water will still be flowing opposite to the new set up. so it will take a bit of time for the water motion to stop and switch directions. during this you will have some random water movment in the tank.

Steve

[golf nut]

Originally Posted by StirCrazy

as for the timers, do youmean that you have to substitute different timers or is there an adjustible one (weather it be by dip switch or screw)

They are all adjustable but come in ranges to suit your needs.

"THCU-E offers three time ranges: 0.1 second to 102.3 seconds in 0.1-second increments, 1 second to 1023 seconds in 1-second increments, or 10 to 10230 seconds in 10-second increments. Ten-position binary dipswitch is easy to program."

Originally Posted by StirCrazy

Don't know who bean is but I think you miss read what I ment. the random activity I was talking about wasd of the water in the tank as it reverses direction. so once the inlet/outlet switch the water will still be flowing opposite to the new set up. so it will take a bit of time for the water motion to stop and switch directions. during this you will have some random water movment in the tank.

Steve

Ah now I understand what you mean, yes there will be the transition time, and random things going on for that time frame.

Bean is Beananimal...

[StirCrazy]

Originally Posted by golf nut

They are all adjustable but come in ranges to suit your needs.

"THCU-E offers three time ranges: 0.1 second to 102.3 seconds in 0.1-second increments, 1 second to 1023 seconds in 1-second increments, or 10 to 10230 seconds in 10-second increments. Ten-position binary dipswitch is easy to program."

hmm so the timners don't go long enough for a natural tidal cycle. would nee up to about 21600 seconds to get to six hour mark, but 2.7 hour cycle would probably be fine.

damn you.. I was going to hold off a year or two befor I start building my next set up now you got me thinking

Steve

[golf nut]

Originally Posted by StirCrazy

hmm so the timners don't go long enough for a natural tidal cycle. would nee up to about 21600 seconds to get to six hour mark, but 2.7 hour cycle would probably be fine.

damn you.. I was going to hold off a year or two befor I start building my next set up now you got me thinking

Steve

I'm sure if you wanted 6 hrs it could be accomplished easily, you could likely invest in a small PLC and get someone to program it to run for 6 and a half hour cycle which would repeat, that way the high and low tides would change daily just like in the natural world.