Question for all of you that have or SELL controller's

[Doug]

I have had my Reefkeeper for close to 4yrs. now. Not a problem except a temp probe failure. I now keep them on hand and replace as needed, every year or so, just in case. Also had nothing but great customer support from them.

I would have no problem going with one of the newer RK models but if I had a large tank and was doing it all again may choose the Profilux models sold by several of our sponsors.

[The Grizz]

So I think I am leaning towards the Reef Keeper Elite, here is what I would get:

ReefKeeper Elite (NET)
Package Contents:
1 x ReefKeeper Elite Head Unit (GC1)
2 x RKM-PC4 (total of 8 outlets)
1 x RKM-SL1 (Inputs: pH, ORP, Temperature, 2 x Switch Ports)
1 x RKM-NET
1 x Temperature probe
1 x Digital Aquatics pH probe
1 x SID - System Interface Device
1 x 6' USB Cable
1 x 6' Bus Cable
2 x 3' Bus Cable
2 x 1' Bus Cable
1 x 7' CAT5 Ethernet Cable
10x Mounting Screws

SL2
Package Contents:
1 x RKM-SL2 module
1 x 3' Bus cable
2 x Mounting Screws

I would also get a double float switch and when available the new version probe for conductivity.

[Slick Fork]

I've got the profilux and am quite happy with it. I would consider the controller as an investment... consider all the things you'd love to do to the tank and buy the controller that will grow with you.

With a tank your size, I would NOT buy the cheapest one that will "work for now". It should facilitate your add-on goals, not limit them.

[The Grizz]

I hear ya Chris, I really don't for see any more major add-on to this tank. I am almost happy with the way it is and the RKE has a lot more that I could add down the road. I just like the simple set-up factor, I have talked to a few people with both APEX and RKE and most say RK is a little easier to set-up and run. As my wife will have to be show how it work to it has to be a little easier.

[Slick Fork]

Don't know what the other two you are looking at cost but this is a good deal on a profilux

http://www.canreef.com/vbulletin/sho...threadid=70598

[The Grizz]

Originally Posted by Slick Fork

Don't know what the other two you are looking at cost but this is a good deal on a profilux

http://www.canreef.com/vbulletin/sho...threadid=70598

Hey Chris I just looked into the link you sent me and I can get everything I want for about $100 more. With the start up kit I would have to add about $400 more for the add on mods and probes.

[RyanJ]

I have the Neptune Apex bud.. and I cant say I have tried the others! but i love the Apex! (Not the Lite) The light only has 1 PH port! and no Digital Inputs for float switches! But from what I have seen the Apex kicks some ass! And you do not need to buy additional Addons for it to be used on a network! its a All in one unit! But like I said I have not tried the others at all! But my experience so far is awesome! and the iphone app kicks some serious ass!. IMO they all do the same thing! but soe do it cheaper and easier! Im NO programming master But this thing was soo easy to setup! and even easier to use! The shitty thing is that I do need to buy the breakout box for the condictivity and then I will be happy! BUT on a word of caution! do not order factory direct they are kind of dumb! I ordered mine from then cuz they said it would come with a ph probe! for the same price that JL has it on there site! so i thought what the hell! Well. when I got it, the PH probe was not there... and when I looked at the invoice they knocked off 40 bucks! I was like Hell yeas! but that wasnt the case! They took out the PH probe and shipped it to me without informing me that they were Taking the ph probe out.. Then AFTER we were all said and done they wouldnt admit fault! or ship a ph probe! they offed $10 off the probe tho! But i had to pay shipping again.. Was kinda Effed up!! I just thought someone would like to know that!!!