![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||||
|
|||||
![]() I chose the Apex because of the support out there and the fact that I could monitor and control my tank from anywhere either by phone or Internet. The Apex also allows you to receive alerts both by text messages to your cell and emails. Another reason that I went with the Apex was they already had stuff built into their controllers that DA had been promising for a year and still not delivered.
__________________
![]() |
#2
|
|||||
|
|||||
![]() Quote:
__________________
Feed the bear goodies, make a new friend, don't feed the bear............... 8' - 165gal Reef DIY LED's Build 2012 Nano Contest Winner Febuary 2013 POTM Winner 300 gal + 60 gal Complete DIY Build Last edited by The Grizz; 12-05-2010 at 06:09 AM. |
#3
|
|||||
|
|||||
![]() I have had my Reefkeeper for close to 4yrs. now. Not a problem except a temp probe failure. I now keep them on hand and replace as needed, every year or so, just in case. Also had nothing but great customer support from them.
I would have no problem going with one of the newer RK models but if I had a large tank and was doing it all again may choose the Profilux models sold by several of our sponsors.
__________________
Doug |
#4
|
|||||
|
|||||
![]() So I think I am leaning towards the Reef Keeper Elite, here is what I would get:
ReefKeeper Elite (NET) Package Contents: 1 x ReefKeeper Elite Head Unit (GC1) 2 x RKM-PC4 (total of 8 outlets) 1 x RKM-SL1 (Inputs: pH, ORP, Temperature, 2 x Switch Ports) 1 x RKM-NET 1 x Temperature probe 1 x Digital Aquatics pH probe 1 x SID - System Interface Device 1 x 6' USB Cable 1 x 6' Bus Cable 2 x 3' Bus Cable 2 x 1' Bus Cable 1 x 7' CAT5 Ethernet Cable 10x Mounting Screws SL2 Package Contents: 1 x RKM-SL2 module 1 x 3' Bus cable 2 x Mounting Screws I would also get a double float switch and when available the new version probe for conductivity.
__________________
Feed the bear goodies, make a new friend, don't feed the bear............... 8' - 165gal Reef DIY LED's Build 2012 Nano Contest Winner Febuary 2013 POTM Winner 300 gal + 60 gal Complete DIY Build |
#5
|
|||||
|
|||||
![]() I've got the profilux and am quite happy with it. I would consider the controller as an investment... consider all the things you'd love to do to the tank and buy the controller that will grow with you.
With a tank your size, I would NOT buy the cheapest one that will "work for now". It should facilitate your add-on goals, not limit them. |
#6
|
|||||
|
|||||
![]() I hear ya Chris, I really don't for see any more major add-on to this tank. I am almost happy with the way it is and the RKE has a lot more that I could add down the road. I just like the simple set-up factor, I have talked to a few people with both APEX and RKE and most say RK is a little easier to set-up and run. As my wife will have to be show how it work to it has to be a little easier.
![]()
__________________
Feed the bear goodies, make a new friend, don't feed the bear............... 8' - 165gal Reef DIY LED's Build 2012 Nano Contest Winner Febuary 2013 POTM Winner 300 gal + 60 gal Complete DIY Build |
#7
|
|||||
|
|||||
![]() Don't know what the other two you are looking at cost but this is a good deal on a profilux
http://www.canreef.com/vbulletin/sho...threadid=70598 |
![]() |
Thread Tools | |
Display Modes | |
|
|