can you run zeolites in a phosban reactor?

[Myka]

Ya, it works better if you take the top off, and just put the inlet hose right onto the standpipe. Then you just let it overflow into your sump. This way you can use the standpipe to "plunge" it twice a day. Provided you have room to plunge...depends how much rock you need to put in there...?? You might break the bottom plate in the TLF reactor doing this too, so you might need to beef it up with a custom cut acrylic one from your local CNC shop.

[globaldesigns]

Originally Posted by Myka

Ya, it works better if you take the top off, and just put the inlet hose right onto the standpipe. Then you just let it overflow into your sump. This way you can use the standpipe to "plunge" it twice a day. Provided you have room to plunge...depends how much rock you need to put in there...?? You might break the bottom plate in the TLF reactor doing this too, so you might need to beef it up with a custom cut acrylic one from your local CNC shop.

+1, as long as you can aggitate them properly I don't see a problem. The Zeo Reactor makes it easy, but I have heard of people just putting Zeolites in carbon bags and putting them in a flow area and manually mixing them aroung. I can't say this method works either, but I have heard of it being done.

[Myka]

Originally Posted by globaldesigns

I have heard of people just putting Zeolites in carbon bags and putting them in a flow area and manually mixing them aroung. I can't say this method works either, but I have heard of it being done.

I would advise against this as you can't control the flow, just guesstimate what goes through. Without flow control you don't have nutrient control which could be detrimental if you inadvertently suck out too much too quick. I have firsthand experience on this one. I didn't even know I had any nutrients to suck out! I imagine it would be compounded in a higher nutrient system.

[tlo]

thanks for all your replies. A fellow reefer has actually offered to lend me a zeo reactor that he is not using.
THis will give me an idea how well it works before I decide if I want to purchase one for myself.

[globaldesigns]

Originally Posted by Myka

I would advise against this as you can't control the flow, just guesstimate what goes through. Without flow control you don't have nutrient control which could be detrimental if you inadvertently suck out too much too quick. I have firsthand experience on this one. I didn't even know I had any nutrients to suck out! I imagine it would be compounded in a higher nutrient system.

That is very true, as flow is important. I should of stated that, thanks... But again I have heard people doing it.

Personally I would just invest in a reactor, they are quite inexpensive now. Look at the vertex models. Maybe there are cheaper ones over the Vertex.