The LAST big upgrade

[michika]

I've kind of always been under the impression (and I don't know where I got it from) that Western pump just did fittings and rigid PVC! I'll hit up Gregg and Western Pump once the tank is in the house. I just don't want to pay the mark-up that I know some retailers put on their plumbing supplies, I'm cheap like that. Is SpaFlex a trade name?

I'll find a Saturday to go fill up my car with plumbing parts and fittings, and then when I inevitably forget some key part or piece I'll make a second, and then a third trip back on out.

Depth is still going to be 2ft, and width of 3ft. I never really looked at the numbers, just stared, drooled, and fantasized about how awesome this tank is going to look when its all done and starting to grow in.

[Delphinus]

I'm not sure if it's a trade name but if you ask for spaflex or flex PVC at the counter they will know what you mean. You specify a length, they go back and come back out with it in hand. The fittings and such are just in the aisles but the spaflex and a few other specialty fittings (ie., John Guest and so on) tend to be in the "you have to ask for it" category.

Oh ok, I see that the numbers in the drawing are correct after all, it's just confusing how they labelled them then sort of overlaid the labels so I misread which one was which.

[Delphinus]

BTW in this case I say "depth" when I mean the front-to-back dimension, and I use "height" as the bottom-to-top dimension. Depth is a bit confusing since people think of "depth" as the sort of "negative altitude in water" when in the ocean, but with tanks it seems to mean the front-to-back in that you specify dimensions usually in the order of lwh ("length, width, height") so with your tank it's 10'x3'x2' but then you're looking at it from the long side so it gets all confusing like. Anyhow sorry for the tangent.

[michika]

Originally Posted by Delphinus

BTW in this case I say "depth" when I mean the front-to-back dimension, and I use "height" as the bottom-to-top dimension. Depth is a bit confusing since people think of "depth" as the sort of "negative altitude in water" when in the ocean, but with tanks it seems to mean the front-to-back in that you specify dimensions usually in the order of lwh ("length, width, height") so with your tank it's 10'x3'x2' but then you're looking at it from the long side so it gets all confusing like. Anyhow sorry for the tangent.

How about this; left to right; 10.5 ft, front to back 3ft, top to bottom 2ft aka giant box o' salty water.

[Lance]

Originally Posted by michika

How about this; left to right; 10.5 ft, front to back 3ft, top to bottom 2ft aka giant box o' salty water.

No, not a giant box o' salty water This is 470 gallons of salty awesomeness!

[michika]

I hear that awesomeness can be measured in an equation of pheasent balls per meters cubed.

[Rbacchiega]

Originally Posted by michika

I hear that awesomeness can be measured in an equation of pheasent balls per meters cubed.

I always thought it was squared...hmmm...either way....go faster! ha ha I cant wait to see this build get started

[Lance]

Originally Posted by michika

I hear that awesomeness can be measured in an equation of pheasent balls per meters cubed.

Hehe We need Brett's input here. He's the resident expert on pheasant ball mathematics.