![]() |
|
#1
|
|||||
|
|||||
![]() In my experience with the herbie setup I can't ever tune the gate valve finely enough to EXACTLY match the pumps output. The output also does change I suppose very slowly as it gets dirty. Either way what I have done is get it as close as possible so that the very slow creep is up and the emergency drain always has a very small amount just seeping down it. Bubble free, silent and like you said I have both my main pipe and my emergency very high. The overflow skims but drops about 1/2" into the box.
|
#2
|
||||
|
||||
![]() When I end up having to upgrade my tank to fit the growing school of tangs, I will probably be looking at a tank of the same dimensions. 72" x 30" x 30". I'd have to remove the door frame but if I have to do that, then it'll be worth it. What a huge thread Tony.
Anthony
__________________
If you see it, can take care of it, better get it or put it on hold. Otherwise, it'll be gone & you'll regret it! |
#3
|
||||
|
||||
![]() I am glad that your wave box will work for you. When are you putting rock in that bad boy?
|
#4
|
|||||
|
|||||
![]() Hey Tony, can I come by to see the new setup. Please Please, pretty please?
__________________
![]() Setup: 180G DT, 105G Refuge (approx. 300lbs LR, 150lbs Aragonite) Hardware: Super Reef Octopus SSS-3000, Tunze ATO, Mag 18 return, 2x MP40W, 2X Koralia 4's Wavemaker Lighting: 5ft Hamilton Belize Sun (2x250W MH, 2X80W T5HO) Type of Aquarium: mixed reef (SPS & LPS) with fish Dosing: Mg, Ca, Alk |
![]() |
Thread Tools | |
Display Modes | |
|
|