Lost my mind....or, here we go again!

[Aquattro]

Oh sure, be a Dr, then work on the obligatory golf game Hey, we still need to get out for that ride!

[StirCrazy]

well that suck that sea star won't notch a tank. for mine I did it with a glass cutter and a template to follow. you can't run corners with a glass cutter so it is a big curve.. then I used the dremmel to shape it. going to be a lot harder to use a glass cutter on the thicker glass you will have.. talk to the glass smith.. they have glass grinding router bits... might be an option.

Steve

[Aquattro]

Ya, I certainly wouldn't use a glass cutter Japarto suggested a cutting disk, he's used one before without problems. Victoria Glass might also do it. Worst case, I'll drill it and run an internal box. Not a huge deal, if it's going to be easier.

[StirCrazy]

Originally Posted by Aquattro

Ya, I certainly wouldn't use a glass cutter Japarto suggested a cutting disk, he's used one before without problems. Victoria Glass might also do it. Worst case, I'll drill it and run an internal box. Not a huge deal, if it's going to be easier.

ya the diamond cutting disks might work. just keep water on it so it doesn't heat up.

Steve