Lost my mind....or, here we go again!

[freezetyle]

if you want to see the noise level on a "beananimal" overflow i am getting a tank this weekend with it. you are free to come and see if the noise level ease of setting it up would be worth it for you.

[Aquattro]

Jon, I'll take you up on that. PM with your info and we'll talk!

[Canadian]

Hey Jon and Brad.

Just for clarification: Jon's tank doesn't have a full-on Bean Animal overflow. I disconnected the piece of tubing from one of the stand pipes and eventually removed one of the elbows effectively turning it into a Herbie with two fail-safes because it was more hassle than it was worth. I did that about 5 months ago when we moved into our new place after living with a fussy BeanAnimal overflow for a year. I find it's less finicky this way.

As far as notching goes, SeaStar won't cut a notch but they will build the tank with a notch. The back of my old tank (now Jon's) is notched but they built it by siliconing two smaller pieces on either side of the shortened back pane of glass (this is concealed by the piece of acrylic glued to the inside of the back pane of glass). So one option, albeit likely expensive, is to have them rebuild the back pane of glass.

[freezetyle]

Originally Posted by Canadian

Hey Jon and Brad.

Just for clarification: Jon's tank doesn't have a full-on Bean Animal overflow. I disconnected the piece of tubing from one of the stand pipes and eventually removed one of the elbows effectively turning it into a Herbie with two fail-safes because it was more hassle than it was worth. I did that about 5 months ago when we moved into our new place after living with a fussy BeanAnimal overflow for a year. I find it's less finicky this way.

As far as notching goes, SeaStar won't cut a notch but they will build the tank with a notch. The back of my old tank (now Jon's) is notched but they built it by siliconing two smaller pieces on either side of the shortened back pane of glass (this is concealed by the piece of acrylic glued to the inside of the back pane of glass). So one option, albeit likely expensive, is to have them rebuild the back pane of glass.

Thanks for clarifying. either way you designed that thing to be silent. Thanks again Andrew

[Aquattro]

Andrew, I don't think I want to tank the tank apart and replace panels, so worst case, I'll drill the back and use an internal overflow box using some sort of herbie/beananimal design.
What are you running now? Upgrading ?

[Canadian]

Originally Posted by Aquattro

Andrew, I don't think I want to tank the tank apart and replace panels, so worst case, I'll drill the back and use an internal overflow box using some sort of herbie/beananimal design.
What are you running now? Upgrading ?

Bowing out to spend more time golfing and generally being more active. I want to play competitively next year (more than anything for the fun of it) and need to put the time in to getting my handicap down to a scratch.

[Aquattro]

Oh sure, be a Dr, then work on the obligatory golf game Hey, we still need to get out for that ride!