looking for leftover plumbing parts asap :):)

[reefwars]

God love a rob lol ok few questions

what's the best Rona to go to the one on the west end has vey little. Couldn't even get 45's there last lol

Am I isn't PVC glue? If so is the stuf from rona aquarium safe???

I want to replac the bulkheads in my overflows as mine are stripped from vice grips(not me) where can I get 1" to 1 1/2" bulkheads???

You'd think afer being a renovator for 13yrs some PVC plumbng would be a cinch but I just want to have it running right thanks

[Big Tang]

I bought all mine at the 97 st location but i had them go into the stock above to find everything i needed. As for the pvc cement and primer ive used it on a few tank build's with no ill effects and every one i know that has used it as well.For bulkheads try blue world,big al's or ai .

[reefwars]

ok so i got as many parts as i could think of came to a whopping $80 but better to have too much than not enough sooooo now do i take the plunge and take it apart would suck to find i was missing something or didnt take something into effect worse is everything is glued permanently or has been siliconed together with 20lbs of silicone so ill have to cut it all out which means i better get it back together or my fishies and coral are going to be in for a rough weekend...........reefing

[intarsiabox]

If you still need bulkheads Marine Aquaria has plenty, they are in the back so just tell them what you need. Also when using the pipe primer do it in the garage if possible, it stains everything and is impossible to remove (even with brake cleaner). PVC, ABS and Transition cement is all used in potable systems so it will be safe for the tank.

[bignose]

I have about 15' of 1" pvc pipe. 1" fittings I have 4-45° elbows and 2-slip to thread x-overs if you need. I also have about 15' of 1.5" pvc pipe if you need.

[reefwars]

i may take you up on that im hoping i have everything now but you never know. the monti you gave me is doing great too by the way its got some nice colour to it

[reefwars]

im in need of some bulk heads mine are done im looking for 2x1" and 2x1 1/2" im going to call around tomorrow but if any of the lfs here can shoot me a pm with price and if theres any in stock


drilling acrylic easy as 1,2,3????