|
|
|
||||||||
| Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
06-29-2010, 01:29 AM
|
|||||
|
|||||
I got my marine betta to eat some mysis shrimp and chopped mussel today. Hopefully pretty soon I wont have to spot feed him way inside my rocks. Everytime i stick the tongs in to try and feed the marine betta my trigger eats half the food before I get it in the rocks.
__________________
BioCube 16 gallon. Just rock at the moment. 
|
|
#2
07-01-2010, 03:50 PM
|
|||||
|
|||||
|
Well I have flooded my basement twice in the last week. The one last night was pretty bad though. I left my 200 gpd rodi on last night and a quarter of my basement is wet. So right now I am trying to soak the water out of the rug and I have big fans set up to help it evaporate. I was pretty lucky though the water was just at the powerbars and stuff behind my tank when I noticed it was still on.
__________________
BioCube 16 gallon. Just rock at the moment.
|
|
#3
07-01-2010, 11:03 PM
|
|||||
|
|||||
|
Welcome to the flood club ! Probably won't be your last. Seriously though I hope it all cleans up Ok. I had one myself today with my 33g set-up, never have had a water disaster with this set up, so you just never know.
__________________
Mike 150g reef, 55g sump, T5's, Vertech 200A, Profilux III - German made is highly over rated, should just say Gerpan made. Reefkeeper - individual obsessed with placing disturbing amounts of electricity and seawater in close proximity for the purpose of maintaining live coral reef organisms.
|
|
#4
07-13-2010, 01:27 AM
|
|||||
|
|||||
|
Well I have now purchased a timer for my rodi so that it doesnt overflow again. Today I decided to upgrade my rodi with a couple more filters I now have 2 white prefilters and 2 di resin.
 here is a picture of my fish room i will be installing shelves so that i can organize a little more.  and this is my new addition still in quaranteen a powder blue tang. 
__________________
BioCube 16 gallon. Just rock at the moment. Last edited by Ryanst; 07-13-2010 at 02:52 PM.
|
|
#6
07-13-2010, 02:30 AM
|
|||||
|
|||||
|
just hook up a float valve to the tub and then your ro/di will stop when the float valve is topped off.
__________________
180 starfire front, LPS, millipora Doesn't matter how much you have been reading until you take the plunge. You don't know as much as you think.
|
|
#7
07-13-2010, 02:33 AM
|
|||||
|
|||||
|
One thing I notice when I do my weekly manual topup of my reservoir...there is TDS creep every single time. That is weekly. I can also turn the ro/di off for 10 minutes and still get creep.
So what I do is bypass the DI resin for a minute or two until the TDS after the membrane is 3 or less. then I run it through the resin and into wherever I want good water. This saves your resin from a constant butt kicking. In my opinion doing manual fills in this way will allow your media to go much further. Not that you asked for my opinion but...  Fish room's looking food btw!
|
|
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
