![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
![]() Hi there, I have finally plucked up the courage to show off my little project. Hopefully nobody will fall asleep while viewing this thread!!!!
We decided to develop our basement and suddenly all sorts of thoughts started to magically appear in my head(tanks, tanks, tanks). I work from home and the general idea was to put a big TV/play room in the basement as well as an office so that I could hide away while working. It struck me that it would be nice to have a view in the office and I started putting ideas down on paper. Finally after receiving the appropriate planning permission from the relevant authorities i.e. calgary city, wife etc the work commenced. The idea was to create a tank that was visible from both the office as well as the tv room. Plans were drawn up and the framing began: ![]() ![]() The long support was made of 3 x (6x2") nailed together so that there was complete open access to the sump etc from the office side. ![]() ![]() The TV side was simply made of 2x4" with a 12" gap: ![]() Dimensions for the tank are 84" long x 18" wide by 22" deep. The 2 viewing panels are made of starphire glass. The bottom is 3/4" thick as there will be 5 holes for the closed loop with OM4. The tank is eurobraced. ![]() |
#2
|
|||||
|
|||||
![]() Ooh! Fun! Can't wait to see where this goes.
![]()
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
#3
|
|||||
|
|||||
![]() Its about time
![]() ![]() |
#4
|
||||
|
||||
![]() Hey this sounds great! You haven't mentioned any of the dimension on the tank yet or what kind of equipment you're planning to use.
Love to see these build threads.
__________________
Mark... ![]() 290g Peninsula Display, 425g total volume. Setup Jan 2013. |
#5
|
|||||
|
|||||
![]() Going to be following this one
|
#6
|
|||||
|
|||||
![]() Following along as well..
![]() Mark, look at the text under his pics for tank dims... ![]() |
#7
|
||||
|
||||
![]() Thanks for reading, equipment is one of the tough decisions, below is a list of the planned equipment, I say planned because like a magpie I have a tendency for shiny things....
Reeflo Dart for a closed loop OM4 for closed loop 2 x MP40 ETSS 900XR downdarft skimmer with collection canister Panworld pump - 1000gph for skimmer Homemade T5 lighting unit - 8 bulbs across and 8' long Aquacontroller junior Calcium reactor Kalkwasser reactor Marineland MJ3000 return pump Media reactor for Rowaphos Other minor bits and pieces ![]() |
#8
|
||||
|
||||
![]() ![]() The next stage was to get the tank in.... ![]() ![]() And then a little insulation..... ![]() An inspection by the site manager!!! ![]() And then some drywall and a few coats of paint. ![]() ![]() ![]() Last edited by muck; 06-16-2010 at 02:22 PM. |
#9
|
||||
|
||||
![]() One of the most death defying tricks I have seen in a long time was watching the guys bring the tank in to the house and down the stairs into the basement, they managed to get in in without damaging anything so fair play to them although I imagine their backs will need early retirement if they carry on like that, then again maybe I am just a big girl who needs to man up!
![]() |
#10
|
||||
|
||||
![]() Looks Great Steve!
![]() Always great to see a fellow countryman's tank! How did you make out without the skimmer over the weekend? S.
__________________
Nothing! No Tank, No Skimmer, No Zeovit, No Sump! Just Nothing.......At the moment ![]() Simplycorals 165g Upgrade. |
![]() |
Thread Tools | |
Display Modes | |
|
|