|
|
|
#2
06-06-2010, 05:47 PM
|
|||||
|
|||||
It sounds like maybe the tension in the bent hose is pulling at the bulkhead from the side creating a gap that is leaking. Maybe if you add a few ridged angle pieces of PVC so that you don't need to bend the hose as much you will releave the stress and stop the leak.
A picture of what you have done so far would really help.
__________________
"We shall dive down through black abysses... and in that lair of the Deep Ones we shall dwell amidst wonder and glory forever." - H.P. Lovecraft Old 120gal Tank Journal New 225gal Tank Journal May 2010 TOTM The 10th Annual Prince George Reef Tank Tour 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode
