O.C.'s Pellet questions and answers!

[ILIKECOUGARS]

Originally Posted by loveless

Well I have egg on my face. I took a water sample into a LFS yesterday and guess what. Thats right no Nitrates and no Phos either. Looks like that new test kit I bought was faulty as well as my old one. Now off to buy a new test kit. Hopefully its my tests that are bad and not the LFS'.

Cam

Which test kit were you useing, and kind was the LFS useing? the reason I am asking, is that I am having about the same reading as you were for nitrate. I am running 1L np pellets with a tlf 550 for over 11 weeks, I am useing a Salifert test kit.

[loveless]

Originally Posted by ILIKECOUGARS

Which test kit were you useing, and kind was the LFS useing? the reason I am asking, is that I am having about the same reading as you were for nitrate. I am running 1L np pellets with a tlf 550 for over 11 weeks, I am useing a Salifert test kit.

I was originally using Salifert as well which was an old test kit. then I bought a Red Sea test kit. Both showed fairly close to the same readings. I think that the lfs was using a hagen? not entirely too sure.

[lastlight]

If you don't have a very high powered skimmer (Tunze Nano) will the pellets have any negative effects? Doesn't this mulm need to be skimmed out quickly?

[loveless]

Originally Posted by lastlight

If you don't have a very high powered skimmer (Tunze Nano) will the pellets have any negative effects? Doesn't this mulm need to be skimmed out quickly?

I have noticed my PH being lower as of late and assume its either low oxygen levels or my probe needs calibration. I think what they say is its best to get the majority of the "mulm" out to raise the level of dissolved oxygen as the bacteria on in the mulm is using it up which is why u are supposed to put the out put of your reactor in front of the skimmer. Also a better skimmer will oxygenate the water more effectively.

[lastlight]

My tank is open-top with a powerhead aimed at the surface so I think my oxygen would be ok. My concern is a buildup of this mulm when my skimmer doesn't remove large volumes. I'm thinking the water will get cloudy and the mulm may possibly have other effects if left in the water.

[loveless]

From what I have noticed in my tank is that there really is no noticeable discharge from the reactor itself. Maybe there is a little bit more particulate in the water column but definitely no clouding. Also the mulm is taken up by fish corals and other critters as afood source. I see my fish eating alot of stuff from the water lately. Also my skimmer is kinda small for the size of tank I run as well.

[burrows14]

I just setup my vertex uf-15 reactor and have it Tee'd off of my return pump with the oulet feeding into my skimmer conpartment and getting lots of flow thru the reactor but no tumble I added a 500ml bag to the 300ml I already had in my TLF reactor. Do I have to many pellets? should I remove some and throw them out?