O.C. Exclusive new Silicone Frag Glue!!

[burrows14]

has anyone done any aquascaping with this?

[OceanicCorals-Ian-]

We have another limited order of the O.C. CoralSTICK in the works! We have also had to raise the price a little due to the increase in cost of importing the materials.

Thanks again! Enjoy your Glue!

[OceanicCorals-Ian-]

A new batch of CoralSTICK has arrived! Get yourself some of the best frag glue available on the market!

We also now have a coraline purple version coming in about a week!

O.C.

[lastlight]

So is this stuff any different than reg 2-part epoxies with regard to it being meant to fill crevasses or wrap around frags? It grips but is not a glue per se. You can't simply press a frag into it like glue can you?

[don.ald]

it is another -- 2-part epox--. easy to use but not a glue per se.

Originally Posted by lastlight

So is this stuff any different than reg 2-part epoxies with regard to it being meant to fill crevasses or wrap around frags? It grips but is not a glue per se. You can't simply press a frag into it like glue can you?

[shrimpchips]

Originally Posted by lastlight

So is this stuff any different than reg 2-part epoxies with regard to it being meant to fill crevasses or wrap around frags? It grips but is not a glue per se. You can't simply press a frag into it like glue can you?

I found that it didn't stick very well to anything - wet or dry. But it molds very well and doesn't cure hot so one would think that it's better for frags and such over the traditional two part epoxies.

[Werbo]

Has anyone mounted more that 10 corals at one time with this new OC epoxy?

My pet peeve with standard epoxy's is that after mounting 10+ frags the skimmer overflows.

[Borderjumper]

Originally Posted by shrimpchips

I found that it didn't stick very well to anything - wet or dry. But it molds very well and doesn't cure hot so one would think that it's better for frags and such over the traditional two part epoxies.

That was my experiance also. Its really soft and easy to work with and molds nicely, but I couldnt get it to stick to anything.

[OceanicCorals-Ian-]

Originally Posted by Borderjumper

That was my experiance also. Its really soft and easy to work with and molds nicely, but I couldnt get it to stick to anything.

The glue is not sticky but will adhere to rocks etc quit nicely once it is about 3/4 hardened, it will push nicely into porous rocks and hold solid. You could likely frag every coral in your tank and the skimmer would not be effected.

Our newest purple version is a little more sticky but still will not stick to just anything it touches. For those looking for it to stick to more non porous surfaces I suggest you wait a while longer until it hardens up about half to 3/4 fully cured.

The real advantages of our glue is the following;

1. No skimmer issues
2. No water clouding
3. No stained fingers
4. No stuck glue on fingers
5. No exothermic heat (damages frag tissue)
6. No smell
7. Copletely FDA approved materials
8. Easier to mold into shape
9. No cracking or breakage once cured