Tanks from Source Aquatics Calgary? Too good to be true??

[Rahim101]

Originally Posted by zum14

Ok so mulling over this a bit more and i think i should put this out there to see what people think because its one thing that i kind of have trouble with. I find that once a company knows that they have the repor to do so they will bend you over a barrel. What i mean is that you have a company such as source aquatics, they may not have such a good track record, they prob spend $100 on glass and $100 on man hours to make a tank say 180 gal. They then turn and sell the tank for 450$. I will not deny the chances of getting a sub par product because, to a point, it is true you get what you pay for. But my problem is you get places that have a good repor with everyone and all the sudden there stuff is gold. They may spend $200 for the same amount of glass but better quality, and maybe $250-300 for man hours for better built product, But they then turn and sell it for $1500-$2000 for there name and because they basically go well its this or the bad stuff. I just have trouble trying to figure out whether or not the extra 1000 is worth the bragging rights. In the end i will prob spend the extra for the peace of mind but its just something that i find troublesome.

Just so every knows...I'm Ray from Bow Valley / Source Aquatics.

I have been doing some of the marketing for Mitch just to bring in some more "retail" business and work a commission based on sales I bring into the shop. I put up that website for free ....yes because I don't get paid for marketing.

Bow Valley has been in business in Calgary for 35 years and has been building tanks for 30 of those years. most of the tanks built 30 years ago, are still holding water and in the last 20 years, we have only had 1 tank with a faulty seam and 3 tanks with minor leaks come back to the shop. We offer a warranty on all the tanks and back our products.

We use NEW glass on all of our tanks of 3 years ago.

We all know that dealing with Mitch can be tough and that is why I'm here. to help smooth the edges of Mitch. Mitch can be quite generous with his timeliness on getting product to the end user and we are working on at least giving a more reasonable waiting period where we think the tank can be delivered as promised.

Bow Valley Services has been supplying local, provincial, national and recently stores all over the USA.

for prices, I think we are more than competitive with 180 gal tanks selling for $375.00 with glass tops etc, etc.

I have heard MANY people complain about the service of the company but not many once the receive the product.

As far as the bubbles in the silicone, they happen when you squeeze the the silicone out of the tube.

Just a note, I'm not here defending the company, just providing information.
I dont own the company just do a bit of marketing that helps pay for my hobby and my tanks.

My VERY first tank was bought from Gold Aquariums and was a Bow Valley Tank and I have personally owned 30 tanks built by Bow Valley and never had a leak or any issue.

I you have had any issue, please PM me and we can find a way to deal with it.

if you do end up purchasing a tank from Bow Valley and anyone tells you that you can have the tank in a few days, its just not going to happen, plan to wait around 3 weeks as that's probably how long it will take.

Any questions for me...feel free to PM.

Cheers,

PS: we have a new website www.sourceaquatics.com

[Canadian]

Originally Posted by Rahim101

As far as the bubbles in the silicone, they happen when you squeeze the the silicone out of the tube.

So are you implying that other manufacturers who make tanks without bubbles in the silicone are either a) not using silicone or b) not squeezing it out of the tube? I'm confused.

The few times I've built overflow boxes for my tanks with silicone and glass I haven't had any air bubbles. Of course I was very careful and took my time preparing the glass edges, cleaning the glass, applying a nice even bead of silicone, and very carefully placing each piece of glass. Would it be out of the question to suggest it probably has more to do with attention to detail and not inherent problems with the product?

[lastlight]

I find it interesting that the new marketing requires the use of a different business name. Aesthetics and shower door scraps aside (my sumps from within the last 3 years) there is no doubt these tanks hold water well when you finally get them. I think it's a good thing there are products available to hobbyists with different budgets and expectations.

[Rahim101]

The marketing is done under MY company (Source Aquatics), if you phone and buy a tank from "Source Aquatics" I get a commission....thats the only reasoning behind it. it helps me keep track of the my sales.....thats all.

[Blowfish]

if you want a nice bow valley aka "source aquatics" tank here in bc, just go to bcaquaria and contact MUNSTER TANKS they get all their tanks made by them, i guess for freshwater tanks the quality is ok??

[zum14]

thats interesting if true as his prices are pretty steep comparativly.

[The Tank Guy]

Originally Posted by Blowfish

if you want a nice bow valley aka "source aquatics" tank here in bc, just go to bcaquaria and contact MUNSTER TANKS they get all their tanks made by them, i guess for freshwater tanks the quality is ok??

'contact MUNSTER TANKS they get all their tanks made by them' is absolutely false. This statement is definitely not accurate information.

[zum14]

Change your mind on my post? I hope you read it correctly now. I read yours before deleting. Im happy to have people come in and clarify posts to get the truth and also a good time to see someone stand behind there products. Thats what these forums are for. Just please keep it professional. If you still have a problem i have my answer to it saved and will happily pm it to you.

[Zoaelite]

I'm a little confused, does Munster tanks build any of its own tanks? If not what service do you provide to justify increasing the cost of the product you provide?

[The Tank Guy]

Originally Posted by zum14

Change your mind on my post? I hope you read it correctly now. I read yours before deleting. Im happy to have people come in and clarify posts to get the truth. Thats what these forums are for. Just please keep it professional. If you still have a problem i have my answer to it saved and will happily pm it to you.

zum14. If you really have a problem with me, call me now at: 604.837.8998. I would love to discuss your displeasure with me further. I do not have a problem with you, just your posts. I look forward to your response.

Originally Posted by zoaElite

I'm a little confused, does Munster tanks build any of its own tanks? If not what service do you provide to justify increasing the cost of the product you provide?

Everyone, I mean everyone, including all the sponsors on this forum and all others, provide a product that they increase the price to make a profit. That is what all businesses do. If anyone wants to know what I provide and do, besides tanks, visit my threads on BCA Aquaria:

http://www.bcaquaria.com/forum/forumdisplay.php?f=44