![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
#11
|
|||||
|
|||||
![]() I was something I tried when I was a Kid 14 or somthing. Only thing I had laying around the house. Tasted pertty good, but rember If you don not watch. Jager will knock you on your ARES. Now I just keep it on Hand.
![]()
__________________
All of the things that I have lost in my life. The one thing that I miss the most is my mind! |
#12
|
|||||
|
|||||
![]() Finally the over flow is out!
![]()
__________________
All of the things that I have lost in my life. The one thing that I miss the most is my mind! |
#13
|
|||||
|
|||||
![]() Well the silicone is removed. It looks like it is not going to be a simple reseal. As i was removing the silicone I noticed the bottom pane is not centered. Back pane bottom centerer no silicone and same with the right pane bottom (corner to corner). Water under the silicone. Dam manufactured tanks. I will be busting this tank apart and rebuild. I hate removing the black plastic trim and cleaning silicone.
![]() The good news the leak looks like it has salt creep and stopped leaking for now. So it give me some time. Crossing fingers.
__________________
All of the things that I have lost in my life. The one thing that I miss the most is my mind! |
#14
|
|||||
|
|||||
![]() I did some work to day. busted the tank a part. Had to cut the plate trim off. There was more silcone holding the trim on then the whole tank. Here are some pic's.
![]() ![]() ![]() ![]() ![]() ![]() ![]()
__________________
All of the things that I have lost in my life. The one thing that I miss the most is my mind! |
#15
|
|||||
|
|||||
![]() And more!
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
__________________
All of the things that I have lost in my life. The one thing that I miss the most is my mind! |
#16
|
|||||
|
|||||
![]() Murphy has just popped his head out again! Drilling my last hole in the center hole. the pane chipped out big. Here are some pic's. Most likely I can not us this bottom pane. I have a spare piece of glass, but it has to be cut, and drilled. It is L48XW24. So I could get the bottom pane and the top bracing out of it.
![]() ![]() I guess it is time for a Jager and 7!
__________________
All of the things that I have lost in my life. The one thing that I miss the most is my mind! |
#17
|
|||||
|
|||||
![]() Yikes! Looks like a lot of work! Good for you for taking on the challenge!....
![]()
__________________
Red Coral Online Store ![]() www.redcoralaquarium.net 45 Gallon Cube with 10 Gallon Sump, Lighting 8 bulb T5, Vertex IN 80 Skimmer -2 Occelaris Clowns, Engineer Goby, RBTA, Peppermint Shrimp |
#18
|
|||||
|
|||||
![]() The chip doesn't look too bad in the photo .. ? I think if the bulkhead covers it you'd still be OK. Although I guess if you have a spare piece anyhow then there's no harm in starting over.
Having drilled my share of pieces over the years, one thing I wish I had at my disposal was a drill press.
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
#19
|
|||||
|
|||||
![]() Quote:
__________________
All of the things that I have lost in my life. The one thing that I miss the most is my mind! |
#20
|
||||
|
||||
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|