Grizz's 8' shallow sea

[The Grizz]

OK well all the plumbing is now done, but now I need to find a new impeller for the MAG 36 pump that was sold to me NFG.

So now it's time to run the check list.

Metal stand...........................check
build sump.............................check
stand door's & top..................check
drill more holes in tank.............check
get lighting............................check
skimmer's, heater's, reactor's....check
line stand with styro...............check
electrical panel......................in progress
water test plumbing................soon
move tank to house................not soon enough

[sitandwatch]

Oooo 8' shallow I like that, looking forward to seeing it moved into your house.

[The Grizz]

Originally Posted by sitandwatch

Oooo 8' shallow I like that, looking forward to seeing it moved into your house.

Me to, it will be a challenge to move from the shop to the house in one piece as I hope to do. I don't want to have to take the bulkheads out to pull the tank off the stand so it will take at least 6 of us to move it in.

[bauder1986]

a hell fire up the skid stear, well do it with the up the the house greg haha

[The Grizz]

Originally Posted by bauder1986

a hell fire up the skid stear, well do it with that up to the house greg haha

Ya I have been thinking of that as well

[The Grizz]

Well I have found a new pump for my closed loop with the help of a cool cat in Regina, lockrookie. Hopefully I will not have to change to much of the plumbing from the OM 4 way.

Finished wiring in light timer's today before my cold got the better of me. Just about done now.

[The Grizz]

New pump is now here for the closed loop today and have it almost plumbed in. Longer cords added to 2 set's of my light's so they reach the timer panel which is 95% complete. Will be finishing up everything tomorrow night and do a water test on the closed loop.

Will add pic's tomorrow.

[untamed]

Originally Posted by The Grizz

Well I have found a new pump for my closed loop with the help of a cool cat in Regina, lockrookie. Hopefully I will not have to change to much of the plumbing from the OM 4 way.

I was just looking at your last plumbing shots of the OM4way. I very sad to tell you that you need to tear apart the plumbing that runs from the OM4ways to the valves and insert some unions in there. You have unions above the valves...but you need to have them between the valves and the OM4way as well.

Also, ensure that on the input side of the new pump it should be similar...valve, then union, then pump.

You need to be able to remove the pump and OM4way completely from the system for maintenance. The way you currently have it plumbed you won't be able to do that once it is full of water.