![]() |
|
#1
|
|||||
|
|||||
![]() Ah ok. Yeah I see. Thanks! If I do decide to go ahead I guess it won't be so bad. It still sounds a whole lot easier to tell the inspector I've decided not to have a sink anymore. What happens after he leaves is ... well .. not his or the city's problem, unless I decide to do something really dumb, which I hope I wouldn't. I figure I can just remove the sink if I ever sell the place.
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
#2
|
||||
|
||||
![]() you can also get expanding pvc joints you cut section of pipe out glue in your t then a piece of pipe on the other side of t then glue on the expansion joint then put your glue on then just pull it out and push it on your pipe that doesnt move . all solid joints.get them at any farm irrigation store or andrew sherets in bc.
|
#3
|
|||||
|
|||||
![]() Hey Tony, I might be in the city this weekend, I am a plumber by trade. If you want me to take a look, let me know, I am sure we can come up with something that will not involve a lot of work, like hammering up a floor. Just a thought.
Bob
__________________
There's plenty of room for all God's creatures. Right next to the mashed potatoes. |
#4
|
|||||
|
|||||
![]() Thanks for the offer. I am sort of thinking of just go ahead and doing it and then not having to worry about it. Too bad I didn't come to this conclusion when I already had the jackhammer last weekend, but oh well, at $40 to rent, it could be worse.
I've figured out where the nearest drain vent is to the roof and determined that it is just a vent (ie., not a drain from any upstairs sink). So it won't be too bad to snake a 1.5" line through the ceiling over to it and tie it in. The main thing is time, my wife works this weekend so I have to find me some babysitters to entertain the kids while I hammer away at the floor. I'm pretty sure the floor drain line runs right underneath the laundry sink so it just needs to come up and then Y-fitting it over to the vent line that will have to snake its way up the wall and through the ceiling. This might be something I can work on during the week after the kids have gone to bed - getting it all roughed in so that all that needs to be done on the weekend is the jackhammering, tie-in, and re-concrete-ing..
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
#5
|
|||||
|
|||||
![]() Helpin Dad is a GREAT babysitter for the kids LOL
![]()
__________________
Dan Pesonen Umm, a tank or 5 |
#6
|
|||||
|
|||||
![]() "here you go son.....hold this jackhammer for a second"
![]()
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694 |
#7
|
|||||
|
|||||
![]() ya, mine was "Hold this cable, hold these wire strippers. Well, since you got both of them, you might as well do something!"
__________________
Dan Pesonen Umm, a tank or 5 |
![]() |
Thread Tools | |
Display Modes | |
|
|