400 gallon project

[untamed]

Originally Posted by Tracey2

Thanks for your help. Can I ask how tall your sumps are? One of my sumps is 60x24x24, 36" will be under my DT and 24" in my fishroom/closet, I was planning my stand 36" tall with a door on one end to access the part of the sump under the DT but if I use the 2x6 like you have on top I will not have alot of clearance, could I do the top frame in 2x4 for a 270g tank?

I'm not an engineer, so I don't know for certain what you can and cannot do.

I believe it is the span of the top frame that drives the choice. In my case, that span was 4 feet and I used 2x6's on edge about 12" apart from each other. This turned out to be plenty of support. (overbuilt)

I don't know the dimensions of your 270 gallon tank, but I would guess that the width is less than 4 feet. So maybe you could use 2x4s. You could also use more of them..maybe every 6" or 8".

My stand is 40" high, btw.