Closed Loop Or Not??? What Is Your Flow Rate's

[The Grizz]

Originally Posted by mark

I've got a Dart/4way CL on a 145g with about 1000gph return, I'm happy.

For a really well done CL layout, check Dez'z build.

Good thread for what others are pushing here.

So what is your turn over rate??

[mark]

Originally Posted by The Grizz

So what is your turn over rate??

~30x of the display

[The Grizz]

What all do you have in there for corals? SPS, LPS, Softy??? Cant really tell completly from the pics.

[Dez]

I have one similar to Mark, a dart running 4 x 1" on a OM 4way. I built a fake rock enclosing an ABS "Y" fitting for the intake, and 4 holes along the bottom.

If you want to waste an hour of your life you can look at the details in my tank build here:

http://canreef.com/vbulletin/showthread.php?t=50842

My corals are growing quick, and when they get really big I might add another closed loop. I can't bring myself to putting a powerhead in my tank. The only visible piece of plumbing in my display right now is the omni flex nozzle from my wavy sea.

[The Grizz]

Hey Dez I have look at your build before but refreshed my memory. I love the way you did the 2 side veiw. I don't know about all this flow rate stuff, but I will ask what your flow rate is? What size of bit / bulkheads did you use? Where did you get the bit's? And when are you coming to drill some hole's in my tank & cut my center brace?

[untamed]

I have two darts on OM4way CLs. So that's maybe 7000gph. A third dart is the return, and I get about 1500 gph out of that one. DT is about 400 gallons...so that is about 21x.

SPS seem happy enough.

[The Grizz]

Originally Posted by untamed

I have two darts on OM4way CLs. So that's maybe 7000gph. A third dart is the return, and I get about 1500 gph out of that one. DT is about 400 gallons...so that is about 21x.

SPS seem happy enough.

WOW only 21x. I have been told by so many that at 40x my 155 does not have enough flow for SPS. What is your secret?

[Reefer Rob]

For the past 3 years I've had Dart on a closed loop with 4 outlets, that's 3600 gph. Dart return feedind 2 Wavy Seas would be about 2400 gph with head loss. Display is 180G so that would be about 33 gph turnover.

Lately I've added a Maxjet mod to increase flow, but it tends to create more dead spots than just the closed loop. Right now I've moved it to laying on the bottom at the back to circulate the water between the 2 overflows. Still playing with it, maybe I'll add another one back there. With the Maxijet the flow would be 42.