Grizz's 8' shallow sea

[Chase31]

more pics

[The Grizz]

Originally Posted by Chase31

more pics

Yes I know could not do anything today as my wife's dad was rush to the hospital by ambulance, so we were there most of the day.

[Chase31]

Originally Posted by The Grizz

Yes I know could not do anything today as my wife's dad was rush to the hospital by ambulance, so we were there most of the day.

oh, im so sorry to hear that hope hes doing okay and you guys are holding up well

[The Grizz]

Thanks Chase, we are holding up ok. Still don't know what is wrong but thing's have improved and should know tomorrow. The wife was exhausted and was able to get some sleep but I was up all night just in case the phone rang and we had to leave in a hurry.

[The Grizz]

So here is an update.

I started the plumbing for the sump today getting the return line done:





Then I built my durso standpipes for dual corner overflows:




And finally I did the overflow to sump line's:




Next will be the 30w UV that I have to figure out where it will go so it is not in the way of the closed loop I have planned. Still need to find a 45mm & 65 mm glass drill bit that are not to expensive to drill for the loop.

[xtreme]

I've gotten hole saws from mops.ca before, they work well and are cheap. I thought I might have a 65mm bit your could have but I went and checked and its 75mm.

[The Grizz]

Originally Posted by xtreme

I've gotten hole saws from mops.ca before, they work well and are cheap. I thought I might have a 65mm bit your could have but I went and checked and its 75mm.

Do you think that a 75 mm hole would be to big for a 1 1/2" bulkhead? I could fill in the hole around the bulk head with silicone.