N/P Reducing Pellets ("Solid Vodka") - "Wow" ... 3 month update

[Coleus]

Originally Posted by globaldesigns

You do need the reactor for the Zeolites, as they need to be tumbled 1-2 times daily. We are using fluidizers or phosban reactors for the NP BioPellets. They are much lighter and tumble quite easily using a MJ1200

Anyone has a good result for just using NP BioPellets alone? I know Kien has but wonder anyone else has.

I am thinking of hooking this up with my TLF and the output will run right into my skimmer.

I really hate changing out Carbon and Rowa.

[OceanicCorals-Ian-]

Originally Posted by Coleus

Anyone has a good result for just using NP BioPellets alone? I know Kien has but wonder anyone else has.

I am thinking of hooking this up with my TLF and the output will run right into my skimmer.

I really hate changing out Carbon and Rowa.

The pellets alone work great; however, you will still want to run carbon as the pellets alone will not make up for what carbon does. Carbon helps soak up impurities like chemicals, dyes, tannins, metals, odors, etc.

Ian

[Werbo]

I am planning on running 2 TLF reactors. One with carbon and the other with vodka pellets. Could one MJ1200 provide sufficent flow to accomplish this and still "tumble" the pellets?

[OceanicCorals-Ian-]

Originally Posted by Tyler Werbowski

I am planning on running 2 TLF reactors. One with carbon and the other with vodka pellets. Could one MJ1200 provide sufficent flow to accomplish this and still "tumble" the pellets?

Depends on how much carbon and how much in pellets you plan to run. Daisy chained together with one MJ1200 might not cut it.

[hillbillyreefer]

I've been running it for 13 days. The tank with bryopsis, I'm not seeing any difference in. One of the other tanks that had alot of bubble algae, and cyano I'm seeing differences in. The bubble's are disappearing, and the cyano is getting worse,but not much. I'm not sure where the cyano came from but my urchin has been missing in action since just before the cyano showed up. I'd much rather deal with cyano than all the bubble algae so I'm happy. I don't test for phos or nitrates. I've got so much algae in these tanks nothing ever shows up, so I quit wasting my time.

The one major upside I'm seeing is polyp extension. My sps always had a bit of extension, but now it is unreal. A couple of the SPS now have noticeable growth on them. I've got 3 non photosynthetic gorgonians that really haven't ever grown, sometimes they're open most of the time they aren't. In the last week their polyps have been open full time, and new branches are sprouting everywhere. I haven't seen any improvement in the areas I was looking for help in, but the side effects are worth it to me.

I built my own reactors. I used 700 ml pop bottles, cut the bottoms off, covered them with plastic window screens secured with rubber bands. A hole was drilled in the cap so a power head (MJ1200 and Rio 600) friction fit through the hole. To keep the pellets out of the pump a small piece of screen was put over the threads and the cap screwed back on. Works really well. Cost was about twelve cents and 3 minutes of work.

[Willito]

when will the 1000ml be in stock?

[OceanicCorals-Ian-]

Originally Posted by Willito

when will the 1000ml be in stock?

1 Week

[RuGlu6]

Originally Posted by Coleus

Anyone has a good result for just using NP Bio Pellets alone? I know Kien has but wonder anyone else has.

I am thinking of hooking this up with my TLF and the output will run right into my skimmer.

I really hate changing out Carbon and Rowa.

I would stay with what works (rowa) for now, at least hold it another month.

Just Pellets alone did not work for me it has been more then 4 weeks i see no change at all, except to be honest very good SPS polyp extension in the first week.

I will continue using pellets for now and report later.