N/P Reducing Pellets ("Solid Vodka") - "Wow" ... 3 month update

[banditpowdercoat]

How much tumbling do you have in the Phos reactor? And did you use the top foam? I have mine fed off my return pump, so am not sure about the flow. They tumble inside. Any more flow and 'm afraid the pellets would float out the reactors top plate holes and into the sump. Which probably wouldnt hurt, as have a screen on pump intake that is to fine for them to fit through LOL

[Chin_Lee]

Tony - any noticeable difference in PE on your SPS or LPS? I'm starting to ponder the use of this........

[Pescador]

Originally Posted by banditpowdercoat

How much tumbling do you have in the Phos reactor? And did you use the top foam? I have mine fed off my return pump, so am not sure about the flow. They tumble inside. Any more flow and 'm afraid the pellets would float out the reactors top plate holes and into the sump. Which probably wouldnt hurt, as have a screen on pump intake that is to fine for them to fit through LOL

So I've joined the club as well, thanks to a very piggy puffer in my 220. I'm running 2 litres in a converted CA reactor.
It's got a screen of that plastic needle point stuff and 2 layers of Enkamat that seems to work pretty well and not plug up.
But how much flow do you need to tumble this stuff? There's an Eheim 1048 on it now that just barely wakes it up.

[OceanicCorals-Ian-]

Originally Posted by Pescador

So I've joined the club as well, thanks to a very piggy puffer in my 220. I'm running 2 litres in a converted CA reactor.
It's got a screen of that plastic needle point stuff and 2 layers of Enkamat that seems to work pretty well and not plug up.
But how much flow do you need to tumble this stuff? There's an Eheim 1048 on it now that just barely wakes it up.

All of the Pellets should be churning and moving in the reactor, more flow the better. My pellets are turning and flowing around my reactor with heavy flow. Pellets that are just tumbling on the top is not enough flow.