![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||||
|
|||||
![]() I am very confused after reading this link.
http://www.sciencedirect.com/science...18e88315e12b13 It appears they add iron into some charcoal as a benefit. If it isn't the carbon that is the problem I'll need to go back to the drawing board.
__________________
![]() Greg |
#2
|
|||||
|
|||||
![]() Quote:
![]() Levi |
#3
|
|||||
|
|||||
![]() So I found this at Physicsworld.com."It is also difficult to separate these small moments from the underlying "diamagnetism" of carbon. This is a very weak form of magnetism exhibited by almost all forms of carbon (and, indeed, by many other elements) in the presence of an external magnetic field. The external field alters the orbital motion of electrons and induces a small magnetic moment in a direction opposite to that of the field itself." AND the reason for what is most likely iron in carbon."The main cause for suspicion was that many of the reports claimed to have detected only small magnetic moments, which can simply be due to traces of natural magnetic contaminants. Iron, for example, is the fifth most common element in the Earth's crust, and its black oxide magnetite is everywhere in the air.
|
#4
|
|||||
|
|||||
![]() I am also experiencing issues. I have had RTN in long established colonies, and most of my smaller frags that I would peg as advance-expert, or expert types. I removed my carbon which look just as bad as Greg's photo, if not worse, and the RTNs have stopped. I did however loose an awful lot of colour from my tank. I also lost three clams, all medium sized; 4-6" inches.
I put my carbon in on the 26th, removed it late evening of the 28th, did a water change, ran new higher grade carbon, along with some other items, and as of today the RTN has definitely stopped. My remaining clams are out, and things are once again opening up. I'm sorry this hasn't solved your issue Greg, but it definitely was the cause of mine. Thank you for posting this, it saved me even if there was some damage done. |
#5
|
|||||
|
|||||
![]() michika were you using the HBH brand as well or a different type?
|
#6
|
||||
|
||||
![]() And does this problem involve the pellets or just the granular version of this particular carbon?
|
#7
|
|||||
|
|||||
![]() Things are definately improving with my system since I removed the carbon.
__________________
![]() Greg |
#8
|
|||||
|
|||||
![]() Quote:
Quote:
Last edited by michika; 02-13-2010 at 02:55 PM. |
![]() |
Thread Tools | |
Display Modes | |
|
|