Ultra power phos review

[Skimmerking]

HUGE change in the PO4 it went from .01 PPM
I changed out the Media and added the recommended dosage to the reactor now and will test at the end of this week. This stuff is alot faster then PHOSBAN., WIth ULTRA PHOS this stuff didnt affect my ALK none what so ever. that is a huge score so no up and down level on the ALK scale AWESOME. Right now the PO 4 is sitting at
0
the big FAT ZERO
NADDA
ZIP.
SO stay tuned for the week 3 that is soon approaching

[christyf5]

Sweet! Ya know, if you get on the full ultralith that brown wafer algae will be gone in a matter of months. I've noticed it starting to come back some in my tank and am thinking about starting it up again. Be interesting to see if you can starve it out with the ultraphos though

[Aqua-Digital]

You can use the full dose of power phos until you reach zero

BUT and this is a big fat but.

You must test by doing a heat test otherwise your results mean, well not a lot really.

Heat a sample of water to 80 degress C (celcius)
allow to cool for 3-5 minutes
test in the normal manner

By doing this you are releasing bound PO4 molecules back into the water for the test solution to absorb.

Once you have zero under heat test conditions you can reduce the amount of phos being used and then look at other regimes such as LNS ultra Lith system.

For the review do not add any bio please as this will give false results.

[Skimmerking]

ok I will stop i have been testing with heating the water at 80F

[Aqua-Digital]

so the results are the ultra phos crashed out the P04 rapidly leaving your sysem PO4 neutral?

if so then continue using it at maintenance levels

Mega fast results but now we must see what this translates to algae issues, and this is why you must continue the test and the use.

[Aqua-Digital]

Heat test is to 80 celcius NOT "F"

please redo

[Skimmerking]

ohhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh:sa d:

WOW I cant believe that I didnt see that this whole time sorry mike.