TLF Phosban Reactor

[Binare]

Originally Posted by rocco134

Makes sense.. Thanks Binare!



Christy... do you run yours in series (daisy chained is what they call it i think)? If you do, what type of pump are you using. The package from J&L (http://www.jlaquatics.com/phpstore/s...ID=tf-reactor3) comes with 1 MJ400 and they say it will be enough to run both reactors.

If you run em in series, you'll basically have to shut both down to do maintenance on one. You'll also have a hard time getting flow right through both. They will both have the same amount of flow... Different media will require different flow. I'd tee off the pump, then put the ball valve on each outlet, then reactor after each valve. That way you can adjust flow independantly. Maintenance is also easier. Simply turn off the valve for the one you want to remove stopping flow to it, but leaving the other one running. Depending on your media, a mj400 may not be enough for 2 in parallel, essentially cuts the flow available to each one in half. I reccomend pre-filters on pumps feeding reactors as well. The sponge will stop pods n such from getting trapped in the reactors and rotting away inside... Kinda defeats the purpose of running them.