I am finely board with the hobby time to down size! So It begins!

[ALBERTA REEF]

Did some research today found two skimmers that are low height. The King Deluxe 300 Internal for 300-800 Gallon Aquarium
Base plate: 12.6" x 19.69"
For tanks from 300 - 800 gallons
2000 L/H air - 792 GPH Water
Total height : 25.59" 58 Watt/h
and
Bubble Magus BM-600PRO
Needlewheel protein skimmer
BM-600PRO
Capability : 2000L-5000L(530G-1325G)
pump:AQUABEE 5000 *2
Pump power: 84W, 220V 50Hz
air intake : 2400L/H
Dimensions: 500*450*670mm(19.6" * 17.7" * 26.3")
cylinder: 12 "
Water Level :9.5"-11"

Height is good but the have a water level 9.5"-11". Bubble King is two much money compared to the Bubble Magus. Both have to have pedestal made for them to get the water height. Bubble Magus runs 2 pumps. I decides to use the two ASM 2G. Together up to 400g. I figger I can mod them.

Stand height would be 36". 29" opening. The stand dimensions will have to change. Change the width to 32 1/4". 74 1/4"lenght X 32 1/4"width X 36"height. Have to be made out of metal Square tubing for strenght

The sump Dimensions have to be changes as well 72"length x 28"width X 20height. Water level height in sump 16". My ASM 2G's running good at the height of 10". 6" stands will have to be made.