![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||||
|
|||||
![]() Personally I am thinking it can be that buckets of salt can have some variance, but also the test kit may not be accurate.
Try another test kit if you have one, or have someone you can borrow another brand of testing.
__________________
![]() Setup: 180G DT, 105G Refuge (approx. 300lbs LR, 150lbs Aragonite) Hardware: Super Reef Octopus SSS-3000, Tunze ATO, Mag 18 return, 2x MP40W, 2X Koralia 4's Wavemaker Lighting: 5ft Hamilton Belize Sun (2x250W MH, 2X80W T5HO) Type of Aquarium: mixed reef (SPS & LPS) with fish Dosing: Mg, Ca, Alk |
#2
|
|||||
|
|||||
![]() Did you give the salt in the bucket a good mixing before you mixed up your batch of salt water? This can greatly help to get the parameters closer to normal as some settling of individual minerals always occurs during transport.
__________________
Do or do not....there is no try. |
![]() |
Thread Tools | |
Display Modes | |
|
|