|
|
|
||||||||
| Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
12-06-2009, 04:01 PM
|
|||||
|
|||||
Looks like a chemical reaction did you use pure vinegar or dilute it a bit?
Could be from the factory as well from the glue and they cleaned it up some so it had a film on it that has now worn off.
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return. 
|
|
#3
12-06-2009, 05:05 PM
|
|||||
|
|||||
|
Not all that familiar with ATI , do they use extruded instead of cast in construction? the crazing you are getting is common with extruded acrylic. You could try one of the acrylic polishing systems that are available to try and smooth it out.
|
|
#4
12-06-2009, 08:16 PM
|
||||
|
||||
|
Looks like it's crazing. http://www.selectplastics.com/index....g-acrylic.html
http://images.google.com/images?hl=e...-8&sa=N&tab=wi
__________________
-=Bryan=-
|
|
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
