![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||||
|
|||||
![]() Maybe when you get all your new stuff this problem will disappear. Try a cucumber in the mean time. (not the ones from the garden)
|
#2
|
||||
|
||||
![]() Oscar,
I would not recommend stirring it, I would use a siphon and slowly start siphoning small areas at a time. How old is your sand bed? I have always used a siphon to clean my sand bed. You can control the flow once you have the sand trapped inside you just bend the hose and it spits the sand back out. |
#3
|
|||||
|
|||||
![]() Quote:
The sandbed is 18 months old. I will have to post a couple of photos tonight.
__________________
CadLights 39G Signature Series Started April, 2008 |
#4
|
|||||
|
|||||
![]() ok here are a couple of photos of the issue. My questions:
1. What is the cause? Over feeding, poor circulation? 2. How do I clean this up? I am sure it is providing some function but it sure is ugly. ![]() ![]()
__________________
CadLights 39G Signature Series Started April, 2008 |
#5
|
|||||
|
|||||
![]() Leah: You think a siphon would solve my sand problem? Are you using a simple Hagen type syphon?
__________________
CadLights 39G Signature Series Started April, 2008 |
#6
|
||||
|
||||
![]() yup, Leah is right. You are suficating your sand bed you will need to siphon your sand do it slowly to not have to much stuff flotting around your tank. You may want to do it a second time, but, before you do it the second time you will need to move the sand away from the walls of the tank. Using an algea scraper and scrape that bad black brown algea off the walls while you have a hose to siphon the bad stuff out of your tank. Then do a complete siphon of your sand again, do your water change and things should settle down from there.
Bill |
#7
|
|||||
|
|||||
![]() Thanks Bill and Leah. I will start that this weekend.
After I get the current situation cleaned up then is siphoning a regular maintenance program?
__________________
CadLights 39G Signature Series Started April, 2008 |
#8
|
||||
|
||||
![]() How deep is your sandbed? Yes I just use the hagen siphon's I think I got them from J&L.
Start slow, do not go overboard and time it with a water change ![]() |
#9
|
|||||
|
|||||
![]() Sandbed is about 2" deep. Yes, I will take it slow and make it part of my water change process from here on.
__________________
CadLights 39G Signature Series Started April, 2008 |
![]() |
Thread Tools | |
Display Modes | |
|
|