![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||||
|
|||||
![]() That was what I thought, Thank you!
|
#2
|
|||||
|
|||||
![]() I wait until the silocone is hard when touched. Hehe, that's usually more than 24 hours.
![]()
__________________
Maintaining Alk at 8 dKh since 2016... |
#3
|
||||
|
||||
![]() i had a custom half inch glass brace done, 48 hours later i filled the tank and it popped silicon along the glass was still sticky
|
#4
|
||||
|
||||
![]() it can take upto a week to cure completely, but such a thin coat may only take a couple of days you don't want uncured silicone in or touching tank water even near the water as it can leach some very bad cemicals and nuke the tank. go slow be safe.
Bill Last edited by bvlester; 12-10-2009 at 05:36 PM. |
![]() |
Thread Tools | |
Display Modes | |
|
|