I tried moving it around a bit but I am trying to keep it low until it adjusts the the new light. I ran the K1 for a couple days now but the coral hasn't really expanded like I know it can, so I am going to run without it and see if it opens up.
I have also discovered that if the wavemaker is unplugged then plugged back in it leaves both pumps on full time until you adjust the controll knob. The problem is with both pumps on the water level in the sump goes way down. So if there isn't enough water in the sump for both pumps on then they will suck air and fill the tank with bubbles. So I had to spend a bit of time trying to find the exact right amount of water were the pumps didn't suck air when both on and the sump didn't fill up past the baffles with only one pump on.
I'm not really impressed with that design.
|
11-15-2009, 03:21 AM
Threaded Mode
