![]() |
|
||||||||
| Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
||||
|
||||
|
I can get just about 1 full turn of the impellor on the magnet. I have cleaned all the scum up and it is clean as a whistle.
Last edited by HL649; 09-08-2009 at 05:28 PM. |
|
#2
|
|||||
|
|||||
|
Does the whole works spin freely on the shaft? Shaft isnt broken?
__________________
Dan Pesonen Umm, a tank or 5 |
|
#3
|
||||
|
||||
|
It spins really nice. Free and easy.
|
|
#4
|
|||||
|
|||||
|
The impeller is the only replaceable/repairable moving part of the typical mag pump. You can probably get one for around $10 and give it a try. If that doesn't help, then the pump is more than likely done.
__________________
Mike 77g sumpless SW DIY 10 watt multi-chip LED build |
|
#5
|
||||
|
||||
|
I've got another pump I used to have in an outdoor pond that I have temporarily hooked up and it seems to be working pretty good.
I still want to get the other pump figured out though.
__________________
75 Gal. display with 40 Gal sump - Dual 1.5" drains, Aragonite sugar sand substrate, SWC Extreme 250 Cone Protein Skimmer, 1800L return pump, 4 AI SOL LED Lights, 250 ml pellets in a recirculating bio-pellet reactor, BRS Doser pumps for Calc & Alk, Tunze Osmolator Auto Topoff system connected Vertex Puratek RO/DI. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|