![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
![]() How does one "gently" break LR to extract a eunicid worm?
I don't want to use freshwater as there are some nice fanworms and good hitchhikers and this is the piece of rock I chose to diversify my tank (though I didn't realize it also had the eunicid worm). The rock in question is the size of my hand (5-6" long 4-5" wide, fairly dense). |
#2
|
|||||
|
|||||
![]() I have always used a chisel, but that is not that gentle. I suppose if you were gentle with the hammer you could do it maybe.
|
#3
|
|||||
|
|||||
![]() Maybe with a tool such as a dremel you could notch out the area you want.
__________________
Adam ![]() |
#4
|
|||||
|
|||||
![]() If you can remove the rock from the tank...... just use a hammer
__________________
Cheers ________________________ 210g Mixed Reef |
#5
|
||||
|
||||
![]() Maybe you could trap it? I'm not sure what you would wanna use for bait though. At least this way you wouldn't have to break up your rock.
|
#6
|
|||||
|
|||||
![]() I haven't tried it, but I would consider lightly drilling it, possibly with a small masonry drill bit.
|
#7
|
|||||
|
|||||
![]() hack saw.. works good and it cuts fast.
Steve
__________________
![]() Some strive to be perfect.... I just strive. |
#8
|
|||||
|
|||||
![]() I use a slot screwdriver with hammer. A couple light taps on the screwdriver, and splits rock nicely
__________________
Dan Pesonen Umm, a tank or 5 |
#9
|
||||
|
||||
![]() I have heard of people pouring soda water into the worm's hole and he just pops out.
|
#10
|
|||||
|
|||||
![]() HULK SMASH!!!
![]() Then just place the pieces back in the tank sans worm. |
![]() |
Thread Tools | |
Display Modes | |
|
|