![]() |
|
#1
|
||||
|
||||
![]() So I think I figured out what to do with my lighting, I had a piece of black acrylic(1/8"), a few cuts here, a few cuts there, some mythelene chloride...ta da....hood/light support
![]() It turned out pretty good, but the acrylic was pretty roughed up so I sanded it and painted the outside with some flat black krylon paint.....turned out nice. What do you all think? ![]() Then i figured there should be some airflow to keep my lights cool so I cut a hole for a fan I yanked from an old computer tower I had. ![]() I just realized that I havent explained where the tank is gonna go and what kind of lighting I am using for this ![]() I have a sunlight supply new wave T5 24" fixture 4 bulb so it should be good for pretty much anything I want to keep in this tank. I'm setting this up next to my desk so that makes it a 3 sided viewable tank....hope it looks good in its final position. I have about 20 pounds of rock curing in my sump for about 3 months now so it should be cycled and ready to go. Anyway hers a pic of the tank in its spot. ![]()
__________________
-Rob 180G tank, custom DIY stand, Sunlight Supply-Sun Blaze 48" 8 bulb T5HO fixture, EuroReef CS6-1 and Vertex in 180 skimmers, 1/4 HP chiller, Tunze wavebox, 40G sump, and 40G refugium. http://www.canreef.com/vbulletin/showthread.php?t=57451 |
#2
|
|||||
|
|||||
![]() Very nice! Looking very clean indeed
![]()
__________________
Calvin --- Planning a 29 gallon mixed reef... |
#3
|
||||
|
||||
![]() Thanks eh!!!
Funny thing is I'm just winging it as I go along.....I'm quickly finding out how much I enjoy working with acrylic.
__________________
-Rob 180G tank, custom DIY stand, Sunlight Supply-Sun Blaze 48" 8 bulb T5HO fixture, EuroReef CS6-1 and Vertex in 180 skimmers, 1/4 HP chiller, Tunze wavebox, 40G sump, and 40G refugium. http://www.canreef.com/vbulletin/showthread.php?t=57451 |
#4
|
||||
|
||||
![]() I did a little modification to my hood/light stand.....I didnt like the fact that it was black on the inside, so I painted the inside with white krylon paint...seems to be more reflective now...
![]() ![]()
__________________
-Rob 180G tank, custom DIY stand, Sunlight Supply-Sun Blaze 48" 8 bulb T5HO fixture, EuroReef CS6-1 and Vertex in 180 skimmers, 1/4 HP chiller, Tunze wavebox, 40G sump, and 40G refugium. http://www.canreef.com/vbulletin/showthread.php?t=57451 |
#5
|
||||
|
||||
![]() Pretty sure the rock I have for this tank is cured by now(2 months) in my display sump, so I think this weekend I will be putting in.
__________________
-Rob 180G tank, custom DIY stand, Sunlight Supply-Sun Blaze 48" 8 bulb T5HO fixture, EuroReef CS6-1 and Vertex in 180 skimmers, 1/4 HP chiller, Tunze wavebox, 40G sump, and 40G refugium. http://www.canreef.com/vbulletin/showthread.php?t=57451 |
#6
|
||||
|
||||
![]() Do we not get to see what your rock structure looks like? Any thoughts on inhabitants?
|
#7
|
||||
|
||||
![]() So I've been thinking about what to do in this tank for filtration...obviously there isnt any room for a skimmer, but I wanted floating particles to be removed at the least. So I built a little hanging basket from acrylic to fit inside my second chamber of the overflow...figure I could use filter floss and carbon or whatever else I want.
![]()
__________________
-Rob 180G tank, custom DIY stand, Sunlight Supply-Sun Blaze 48" 8 bulb T5HO fixture, EuroReef CS6-1 and Vertex in 180 skimmers, 1/4 HP chiller, Tunze wavebox, 40G sump, and 40G refugium. http://www.canreef.com/vbulletin/showthread.php?t=57451 |
![]() |
Thread Tools | |
Display Modes | |
|
|