![]() |
|
#1
|
|||||
|
|||||
![]() i'm going to have it all plumbed and ready to go by the 20th of july,
so that when i get back from vacation on august 5th i can just add water,rock,and sand and start my cycle ![]() |
#2
|
|||||
|
|||||
![]() so a bit of an update,
i have almost all my plumbing supplies. just waiting on a valve,some vinyl tubing, and also i need to make another trip to home depot (some of the stuff i bought is wrong ![]() also, my step dad works at gregs industrial distributors, so he picked up some stuff for me: -5 gallon pails -40 feet of siphon tubing (reches from tank to toilet, plus extra) -clip on light -and one gigantic brute container. i think its like, 40 some gallons? its made of thicker plastic than the smaller ones too. oh, and i found a mantis for the mini fuge! He's only 2 cm long, and i think he might be a G.smithii, but i have to get a better look at him. he's currently in one of the tanks at elite aquatics. once he outgrows the back section ill set up a new tank for him. |
#3
|
|||||
|
|||||
![]() well today i did a leak test, and it went great. no leaks what so ever.
the tank was a little tiny bit off being perfectly level. but, once the rock and sand is in the tank, it should be perfectly level. pics: ![]() ![]() ![]() ![]() |
#4
|
|||||
|
|||||
![]() Word of advice....get the tank level now, as I doubt very much that the 50ish lbs of rock and sand you add will shift the stand level with 300lbs of water already in the tank.
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694 |
#5
|
|||||
|
|||||
![]() +1... Shim it while you can. That way you don't have to worry about it later. You've taken your time so far, no point in taking any short cuts now.
__________________
180G Office Reef. Started Sept 2012 http://www.canreef.com/vbulletin/showthread.php?t=88894 62G Starfire Reef. Started Jan 2013 http://www.canreef.com/vbulletin/showthread.php?t=89988 |
#6
|
|||||
|
|||||
![]() makes sense. thankfully it doesn't need much shimming, but ill have to shim it from the sides, as my sump hangs out the back of the stand on a block of wood (for easy plumbing and added water volume)
|
#7
|
|||||
|
|||||
![]() is it just the pics or did you use white silicone to attach the refuge?
__________________
180G Office Reef. Started Sept 2012 http://www.canreef.com/vbulletin/showthread.php?t=88894 62G Starfire Reef. Started Jan 2013 http://www.canreef.com/vbulletin/showthread.php?t=89988 |
![]() |
Thread Tools | |
Display Modes | |
|
|