![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||||
|
|||||
![]() i use the stand alone doser (3 pump) and fauna additives. works great and is easy to use.
|
#2
|
|||||
|
|||||
![]() I've been using it for about 2-3 weeks now and like it so far. I don't use the FM additives though. I bought the chemicals from chemmaster and mixed them up according to randy holmes-farley's recipe.
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free. |
#4
|
|||||
|
|||||
![]() Quote:
http://www.progressivereef.com/prodd...p?prod=PL-0506 |
#5
|
|||||
|
|||||
![]() I've been using pure 2 part (3 part) for about 2 1/2 years. Before that I used a mixture of Kalk and 2 part. Gave up the kalk as a bad habit. Never owned a calcium reactor, seems complicated a hazardous to me.
Now I use a Profilux controller with doser, but any accurate pump and timer will do. Usually end up checking ca, alk and mg every 3 or 4 weeks. It's pointless to check it any more often once you get the system "dialed in". One day I'll try the FM additives just to see if they do anything. For now I just dose Iodine, and a small amount of Iron for my Macroalgae. Rob |
#6
|
|||||
|
|||||
![]() I have a ProfiLux controller and 3 stage dosing station.
I have been using it for about 2 months now and like it so far. I don't use the FM additives though. I bought the chemicals from Bulk Reeg Supply and mixed them up according to the BRS recipe. Tom R |
#7
|
|||||
|
|||||
![]() I used RHF's three-part recipe with BRS and Chemaster chemicals for several years by hand dosing. It worked well but I found I had to keep up with water changes or my SG would slowly increase. I switched to a CaRx mainly because I was tired of hand dosing. I'll admit that when it came down to buying a doser or a CaRx, the Rx offered more new toys for me to play around with. I'm happy with my CaRx as well, for the record.
|
![]() |
Thread Tools | |
Display Modes | |
|
|