24G shallow glass box

[LeeR]

that wouldn't be to hard. pretty much just a standerd 10G with a few extra inches? should be about $60 for the glass i think.

[LeeR]

new monti with some cool purple and green nems of some sort

and a close up fts

[LeeR]

had a bit of birthday money kickin around and wanted to up my turn over a bit

so from 300 to 600 gph



ceramic bearings


new plumbing.

[Delphinus]

Closed loop or return?

[LeeR]

return

[mr_alberta]

How do you like the Tunze pump? Was thinking about getting one myself for a return pump. How silent is it?

[BlueAbyss]

^+1...

I was looking at this pump but I've decided to go to a Mag 7 for more turnover...

[fishytime]

Ya...+2.... please tell how quiet is das Tunze.

[LeeR]

das tunze is a just a bit louder then the old ehiem 1250 i was running...

not to impressed so far actualy.. i did a water change this morning i went to plugthe pump back in and ....... nothing... not even a hum sound like the impeller is jamed... lots of bad language and a bit of fiddling... as in taking the return apart and pulling the pump out then putting it back in it started working again... so a few mins later i tryed it again and same thing happend.. ssooo its going back on the weekend and seeing if a replacment will change anything.


anyone think it could be like a MH bulb and has to cool down a bit first to fire back up.. because it will only start when i remove it from the water and put it back in...????

[Delphinus]

My Hydor pump is exactly like that. The impeller spins but it won't push water unless it sucks air first. Doesn't seem to be a heat/cooling issue .. I'm not sure why it's like that.